General Precautions For Series Resonance Experimental Device

In addition togrounding through the power line grounding wire, the grounding column of the product shell must be grounded. In order to prevent electric shock, the grounding conductor must be connected to the ground. Before connecting the input or output terminals of the series resonance device, make sure that the product is properly grounded.

GDZX sorted out the following precautions:

1. Theseries resonance test equipmentshall be used by high-voltage test professionals. Before use, the user manual shall be read carefully and repeated operation training shall be conducted.

2. The number of operators of series resonance device shall not be less than 2. During use, the safety operation regulations of the unit on high voltage test shall be strictly followed.

3. In order to ensure the safety and correctness of the test, in addition to being familiar with the instructions of the series resonance device, the test operation must be carried out in strict accordance with the relevant national standards and regulations.

4. The wiring of each joint shall not be wrongly connected, otherwise the test device may be damaged.

5. When the series resonance device is used, the output is high voltage or a higher voltage. It must be reliably grounded and pay attention to the safety of operation.

For more high-voltage test equipment, please refer to the official website of GDZX:http://en.m.xbtforme.com/