Introduction Of SMG2000E Digital Double Clamp Phase Voltammeter

SMG2000E digital double clamp phase voltammeteris specially used to measure voltage, current and phase on site. It is widely used in electric power, petroleum, chemical industry and other industries. GDZX, a power testing equipment manufacturer, introduces a high precision measuring instrument SMG2000E digital double clamp phase voltammeter.

I Product introduction

SMG2000E digital double clamp phase voltammeter is a high-precision, low-cost, portable, dual channel input measuring instrument. It is very convenient to measure the phase between U-U, I-I and U-I on site, distinguish the phase sequence of inductive circuit, capacitive circuit and three-phase voltage, detect the connection group of transformer, test the secondary circuit and bus differential protection system, read out the phase relationship between CT of differential protection groups, and check whether the wiring of watt hour meter is correct.

II Product nickname

Phase meter, double clamp phase meter, double clamp phase volt ampere meter, clamp type phase meter, clamp type phase voltmeter, digital double clamp phase meter, digital double clamp phase meter, low voltage volt ampere phase detector, hand-held digital double clamp phase volt ampere meter, double clamp digital phase meter and double clamp digital phase meter.

III How it works

The clamp current transformer is used to input the measured current, so there is no need to disconnect the measured line. When measuring the phase between U1 and U2, the two input circuits are completely insulated and isolated, so it can completely avoid the short circuit of the measured line caused by the possible wrong wiring, which may lead to the burning of the measuring instrument.

IV Scope of application

The meter is an ideal instrument for secondary circuit inspection in power departments, factories and mines, petrochemical and metallurgical systems. It is especially suitable for relay protection, electric energy measurement, power construction and power transmission engineering.

V Product advantages

1. Easy to use

1) Hand held structure;

2) In the current range of 10mA-10A and voltage range of 3V-500V, there is no need to disconnect the circuit and change the limit of magnitude;

3) The display adopts high contrast liquid crystal display, large characters, and the screen angle can be freely changed about 70° to obtain good visual effect;

4) The function and layout of the switch are reasonable. The measured voltage, current and phase can be read out by turning the switch.

5) The instrument shell is made of Engineering insulating material, and equipped with rubber anti vibration protection sleeve, which is safe and reliable.

2. High resolution

The current resolution is 0.1mA and the voltage resolution is 0.1V.

3. Low power consumption

The phase meter has the function of low power consumption and battery voltage detection.

GDZXR & D and production of SMG2000E digital double clamp phase voltammeter are very popular at home and abroad, welcome to inquiry and purchase!