XP-1A Hand-held SF6 Gas leak detector
This instrument is mainly applied for the leaking finding of equipment and container which are filled with the SF6 and other halogen gas in the ministry of water conservancy and electric power, the manufacturing engineering of electronic device, and the metallurgy of iron and steel, the petrochemical industry, the railway transportation, the mining industry, the extinguisher apartment and the atomic physics research institute.
Manual
Video1. Detecting SF6 gas detection of the power switch;
2. Detecting leakage of various HFC, CFC and HCFC refrigerants;
3. The high efficiency pump inside the probe can reduce the response time of the instrument;
4. No calibration is required and the warm-up time is short;
5. Leakage can be found even in a polluted atmosphere;
6. Ultra-sensitivity: At an annual leak rate of 4.6 g/year, it can still react to a very small amount of leakage;
7. LED leakage loss vector indicator light, there is a reset button on the probe handle, a large amount of refrigerant will not "poison" the probe;
8. The narrow and flexible stainless steel probe can detect difficult areas.
| Measuring Method | mechanical pump style | |
| Flexible probe length | 35.5cm | |
| Leakage level indication | 18 levels | |
| Sensitivity adjustment level | 7 levels | |
| Reset function | yes | |
| Mute key function | yes | |
| battery test function | yes | |
| Ultimate sensitivity | <3g/year | |
| Response time | Instantaneous | |
| Reset time | 1 second | |
| Warm up time | Approximately 2 Seconds | |
| Operating temperature | 30°to 125°F (0℃to 52℃) | |
| Size | 22.9x6.5x6.5cm | |
| weight | 560g | |
| Power supply | 3V DC;two "C" cell alkaline batteries | |
| Battery life | 30 hours | |
| Sensing tip life | Approx. 20 hours | |
| Certifited to | CE,SAE J1627 | |
-
Pre-sale service commitments
-
Sale service commitments
-
Sale service commitments
