How To Deal With SF6 Equipment Accidents?

AnSF6electrical equipmentaccident refers to an accident in which the insulation medium of the electrical equipment is severely reduced to cause internal grounding, short circuit, explosion-proof membrane rupture, or the equipment body seal to cause serious gas leakage.

GDZX reminds: when an emergency occurs in SF6 electrical equipment, the leak alarm device emits light, sound, and sound signals. When handling, the following should be noted in terms of safety:

(1) Seriously eliminate the external pollution of the equipment caused by the fault, and use SF6 flux gasoline or acetone to clean it. Carry out this work should also be in accordance with the provisions of on-site operating regulations to do a good job of safety protection.

(2) In order to prevent the spread of SF6 gas, all the fans of the system must be turned on for strong replacement. Electrical duty personnel should be well prepared for handling, wear safety protective clothing and isolation gas masks, gloves and goggles, and take sufficient measures to prepare before entering the accident equipment installation room for inspection.

(3) The rupture of the explosion-proof membrane of the equipment indicates that there is a serious insulation problem inside, and the arc damages the equipment components, causing the internal pressure to exceed the standard. Therefore, it is necessary to deal with power outages, find out the cause of the accident, and deal with it on the premise of ensuring the personal safety of the staff.

GDZX is a manufacturer ofSF6 equipment. There are many types of equipment produced, excellent quality, and guaranteed service. Welcome to visit GDZX official website:http://en.m.xbtforme.com/